-
IP addresses are NOT logged in this forum so there's no point asking. Please note that this forum is full of homophobes, racists, lunatics, schizophrenics & absolute nut jobs with a smattering of geniuses, Chinese chauvinists, Moderate Muslims and last but not least a couple of "know-it-alls" constantly sprouting their dubious wisdom. If you believe that content generated by unsavory characters might cause you offense PLEASE LEAVE NOW! Sammyboy Admin and Staff are not responsible for your hurt feelings should you choose to read any of the content here. The OTHER forum is HERE so please stop asking.
A Brief Story about Lexus
- Thread starter Froggy
- Start date
The rumour inside NBA back then was it was no random robbery. During the height of his career at Bulls, MJ was also neck deep in gambling at Vegas and other sports betting. His father was also in it acting on MJ's insider info or something.
After multiple run ins with the syndicate, they offed MJ's laopeh as a warning.. which led to him leaving NBA for a couple of years during his prime.
Give me a Mark X anytime. RWD in a nimble body with over 200bhp with room for more power if needed.I have driven a Toyota for more than 10 years. Test drove a Lexus twice, once a friend's car and once at a showroom. My conclusion is that a Lexus is no different from a Toyota, the only differences are the name and the price. Any comments from Lexus fans?
If one wants an ultra reliable tough as a tank.. virtually indestructible vehicle..this one bestest..
One of the oldest parts of the 79 series Landcruiser mods still there is the Opposite Lock big tube steel Bull bar.
Well firstly it looked the part as it was the only 63mm tube bar at the time and I still think it looks really tough and robust. Really suits the 79 series Landcruiser look!
Now days every other big brand followed suit and 63mm bar work for the 70 seems standard. I have stuck with the O/L because I don’t really like the look of the TJM version and the ARB version has a centre bar making spottie mounting a bit of a pain and every other brand I just don’t really know much about or trust.
The exhaust upgrade number 3!
The exhaust was upgraded from a single 3’ Manta to a twin 3’ inch Red back exhaust which I loved so much because the cruiser sounded unreal & seemed to breathe very well.
Now however its on its 3rd and here is why: The twin Redback would not fit with the new fuel tanks and tray so it had to be changed. Not only that the old twin pipes had been worked hard and where rusting out so either way it would have needed a change sooner or later.
The third exhaust is a Torquit single 3.5 inch pipe. The sound is different but after tweaking it I’m now happy with the note it sings. This to me is important, it has to sound sweet when hitting dunes at full pace, I’m a bit old school and I like to listen to the engine and exhaust while driving.
The Driving lights:
LED roof bars:
Previously I had a cheap Chinese LED bar on the front, it kind of did the job but after a while it started to fade into a light brown colour; the plastic light cover became a milky white and was blocking the luminums emitted from the light bar.
Well you get what you pay for! I then went for Altronics LED bars and they were OK for spread not for distance.
Now Ive got 2 20 inch Lightforce LED’s which are spots and fill the gap of light on the roads/tracks. I’ve slightly angled them to gain a little bit of spread yet kept the distance.
Front driving lights:
In the beginning I had Lightforce HID’s 70watts.I then changed them to the HTX’s which are a combo LED 80watt and HID 70watt.
Best lights Ive ever had and they are two in one. I’ve had them for 3 years I think and I’m happy with them. They do everything I need and more.
The boys at Perth Diesel Performance tuned my 79 Series Landcruiser early on first with a Unichip Q which was upgraded lter to a Q4 with injector drivers. This changed my cruiser from a slug to a passenger like car on the highway. It also helped with all the extra weight I was carrying. Now days its like a rocket as I've taken a lot of weight off which makes it so much fun on sand now.
I have 5 different tunes which I helped co test and refine with PDP.
As most other Toyota’s and some other vehicles when they are released from factory they are very under powered which is also why they are so reliable, but there is plenty of ‘safe’ power gains to have from your Toyota 70 series diesel motor.
With the correct power/torque chips (in my case the Unichip Q4) and the right person to ‘LIVE’ tune it on an actual dyno, there is so much locked power, torque to gain. Not only that, the engine & Exhaust temperature and drivability have dramatically improved.
My 70 was tuned for drivability not for crazy numbers at high rpm. I don’t want a race car I want to drive out there and be able to drive home again.
My best advice here is to tune it safe and not for numbers, it’s a diesel not a petrol race car.
For my review and Experience about the Unichip Q4 see this LINK
For Information About The Unichip Q4 In The 70 series LandCruiser See Here.
As mentioned above I have recently replaced the Toyota factory Alternator with a Rapid Power water-cooled 100% sealed alternator in order to prevent the common problem these 70 series Landcruiser have when encountering m&d.
For more details click here for the Toyota 70 series Issues and Fixes
Air intake upgrade (real Snorkel):
The Toyota 70 series factory snorkel is not a ‘snorkel’, it is just a raised air in-take so be warned and be careful when crossing water. To see what I did to fix this and why the factory air intake should not be trusted as a snorkel click here
Since then I’ve been offered to test the Armax which I have rejected due to the following which is my opinion: I’m not a fan of the look, I don’t see the point in a 4 inch when the intake is still 3inch and I’m not a fan of how it mounts to the airbox by cutting and gluing it.
Again my opinion, I get asked a lot which is why I explain. This is not me having a cheap shot. Keep in mind I use a Safari snorkel which is the smaller version of the ARmax Safari snorkel.
There are so many accessories available for the 70 series and everyone so far who has worked on my cruiser have said how easy and enjoyable it is to work on them as everything has been kept simple, nearly the entire interior just clips apart carpet and all.
Being able to fit 35 inch tyres with just a 3inch suspension lift is quite amazing considering most modern 4x4s are very limited when it comes to wheel size. This is mostly due to IFS vehicles, which require cutting into the guards and even body work or over the top lifts.
The engine bay is the most technical area however the rest of the vehicle has been kept very basic and similar to previous 70 series.
I then put some Stratos seats in the 79 Series Landcruiser and it is honestly the best mod I’ve done to the interior of the vehicle to date! I’ve had those seats for 18 months as of AUG 2019 and they are still serving well although there is a bit of wear I’m starting to see. (Review to come)
Space on the rear seats is pretty much the same as any other dual cab on the market; however the windows are so big on the 70 series and combined with the rear seat height compared to the window kids absolutely love it as they have a huge window to look out of. BUT if the kids are teenagers they will not like the rear seat space if they are any taller the 5 foot 10. Leg room is limited.
As of 2019 its rumored that the end of the V8 is near, a possible V6 twin turbo is coming or so the rumors have it…
In my biased opinion this is the best current new 4WD as a base platform to modify. Like I said above “It was not a hard choice to make, given a V8 turbo diesel in a tray back Ute with solid axles, what more could you want?”
For Information About The Unichip Q4 In The 70 series LandCruiser See Here.
Specifications from stock:
Engine: 1VD-FTV, 4461cc, V8, 32 valve, Turbo Diesel
Power: 151kW @ 3400rpm(at flywheel) With Unichip: 129kW @ 3200rpm at rear wheels
Torque: 430Nm @ 1200rpm (at flywheel) With Unichip: 472Nm @ 1600rpm at rear wheels
Transmission:
5 Speed manual
GXL vs. Workmate
GXL Off-road Positives:
Workmate Off-road Negatives:
PART 2: March 2019
The rear evolution is a long and big one! I’ll start from the beginning and work my way to Aug 2019:
· Stage 1; The beginning of the long road, I had a solid plan well before picking up the Cruiser. The plan was to fit an alloy canopy on top of my heavy steel tray. A few lessons were learnt here. You pay for what you get! I got a good cheap price for a canopy from a local Perth business $4500. It wasn’t the best built canopy but it did the job, it was a heavy box and wasn’t really what I wanted. On top of that I put an Ostricwing awning at the time which was awesome but also very heavy. This I had for 2 and bit years before I sold the canopy because #1 it was far too heavy, #2 with all that space I seemed to bring way too much stuff with me & #3 it was a poor layout.
· Stage 2; After selling the canopy I was back to a flat tray with toolboxes and my fridge on the outside, this was nice and light plus very simple BUT not great for creating content. I didn’t have anywhere to charge things etc. so plans for a new half box started. Before that happened, I was rear ended and my tray got replaced via insurance.
· Stage 3; I went to On Track Fabrication and got them to build a new tray with my design and it looked mint and wasn’t too heavy but was heavier than my previous tray. This then later had a frame attached to it to enclose the tray and act as a roof rack plus solar panel mounting area.
· Stage 4; By this stage I got a custom half box made up by C&S canopies, this was a design to be a kitchen/charging station for camera gear and a drawer system on the opposite side. Guess what!? It ended up so heavy again and the cruiser was back to handling like a boat off-road. I sold the drawer system to reduce weight after one single trip to the Kimberly but was stuck with the heavy half box as I had no funds and time to change it.
· Stage 5; A bit later I had been chatting a lot with Jakkie from Quickpitch campers and together we designed Project Black, a new style of halfbox/drawer system that ticket all the boxes. The boxes ticket were the ones from learning from mistakes previously. Project black only weighs 50kg compared to 200kg from the previous half box. No welds! All rivets and glue, super light yet super strong. This was the biggest improvement and best thing I’ve done to date. Most of the design credit here needs to go to Jakkie as he transformed my needs into this clever light weight build. I’ve tested it for 18months with only one minor water leak that has been sorted. No cracks, warping or damage to report.
· Stage 6; a bit later I got the opportunity to test and fit a new light weight PCOR tray from Patriot Campers which is only 220kg far lighter than anything else I’ve ever had. All alloy, rivets & glue. This tray I had zero input into the design but I was sold on the weight and the unique steps & looks. I then added project black to the tray and it’s the best setup to date. I guess only time will tell but as of August 2019 this is the best and 100% lightest setup I’ve had to date.
As for the rest of the 79 series Landcruiser. Well, I like to try new things and change things up when they don’t really work or wear out.
Stage 1: Stock.
Stage 2: Bar Work.
Stage 3: Lift & Tyres on the 79 Series Landcruiser.
79 series Landcruiser V8 Turbo Diesel Dual cab Ute Review.
The upgrade in bar work on the 79 Series Landcruiser!One of the oldest parts of the 79 series Landcruiser mods still there is the Opposite Lock big tube steel Bull bar.
Well firstly it looked the part as it was the only 63mm tube bar at the time and I still think it looks really tough and robust. Really suits the 79 series Landcruiser look!
Now days every other big brand followed suit and 63mm bar work for the 70 seems standard. I have stuck with the O/L because I don’t really like the look of the TJM version and the ARB version has a centre bar making spottie mounting a bit of a pain and every other brand I just don’t really know much about or trust.
The exhaust upgrade number 3!
The exhaust was upgraded from a single 3’ Manta to a twin 3’ inch Red back exhaust which I loved so much because the cruiser sounded unreal & seemed to breathe very well.
Now however its on its 3rd and here is why: The twin Redback would not fit with the new fuel tanks and tray so it had to be changed. Not only that the old twin pipes had been worked hard and where rusting out so either way it would have needed a change sooner or later.
The third exhaust is a Torquit single 3.5 inch pipe. The sound is different but after tweaking it I’m now happy with the note it sings. This to me is important, it has to sound sweet when hitting dunes at full pace, I’m a bit old school and I like to listen to the engine and exhaust while driving.
The Driving lights:
LED roof bars:
Previously I had a cheap Chinese LED bar on the front, it kind of did the job but after a while it started to fade into a light brown colour; the plastic light cover became a milky white and was blocking the luminums emitted from the light bar.
Well you get what you pay for! I then went for Altronics LED bars and they were OK for spread not for distance.
Now Ive got 2 20 inch Lightforce LED’s which are spots and fill the gap of light on the roads/tracks. I’ve slightly angled them to gain a little bit of spread yet kept the distance.
Front driving lights:
In the beginning I had Lightforce HID’s 70watts.I then changed them to the HTX’s which are a combo LED 80watt and HID 70watt.
Best lights Ive ever had and they are two in one. I’ve had them for 3 years I think and I’m happy with them. They do everything I need and more.
Getting more from you under powered VDJ70 engine:
PDP tuning:The boys at Perth Diesel Performance tuned my 79 Series Landcruiser early on first with a Unichip Q which was upgraded lter to a Q4 with injector drivers. This changed my cruiser from a slug to a passenger like car on the highway. It also helped with all the extra weight I was carrying. Now days its like a rocket as I've taken a lot of weight off which makes it so much fun on sand now.
I have 5 different tunes which I helped co test and refine with PDP.
- Tune 1 overtaking and sand dune climbs
- Tune 2 daily driving
- Tune 3 Towing
- Tune 4 High idle from airing up, winching or controlled crawling
- Tune 5 factory Toyota tune
As most other Toyota’s and some other vehicles when they are released from factory they are very under powered which is also why they are so reliable, but there is plenty of ‘safe’ power gains to have from your Toyota 70 series diesel motor.
With the correct power/torque chips (in my case the Unichip Q4) and the right person to ‘LIVE’ tune it on an actual dyno, there is so much locked power, torque to gain. Not only that, the engine & Exhaust temperature and drivability have dramatically improved.
My 70 was tuned for drivability not for crazy numbers at high rpm. I don’t want a race car I want to drive out there and be able to drive home again.
My best advice here is to tune it safe and not for numbers, it’s a diesel not a petrol race car.
For my review and Experience about the Unichip Q4 see this LINK
For Information About The Unichip Q4 In The 70 series LandCruiser See Here.
As mentioned above I have recently replaced the Toyota factory Alternator with a Rapid Power water-cooled 100% sealed alternator in order to prevent the common problem these 70 series Landcruiser have when encountering m&d.
For more details click here for the Toyota 70 series Issues and Fixes
Air intake upgrade (real Snorkel):
The Toyota 70 series factory snorkel is not a ‘snorkel’, it is just a raised air in-take so be warned and be careful when crossing water. To see what I did to fix this and why the factory air intake should not be trusted as a snorkel click here
Since then I’ve been offered to test the Armax which I have rejected due to the following which is my opinion: I’m not a fan of the look, I don’t see the point in a 4 inch when the intake is still 3inch and I’m not a fan of how it mounts to the airbox by cutting and gluing it.
Again my opinion, I get asked a lot which is why I explain. This is not me having a cheap shot. Keep in mind I use a Safari snorkel which is the smaller version of the ARmax Safari snorkel.
There are so many accessories available for the 70 series and everyone so far who has worked on my cruiser have said how easy and enjoyable it is to work on them as everything has been kept simple, nearly the entire interior just clips apart carpet and all.
Being able to fit 35 inch tyres with just a 3inch suspension lift is quite amazing considering most modern 4x4s are very limited when it comes to wheel size. This is mostly due to IFS vehicles, which require cutting into the guards and even body work or over the top lifts.
The engine bay is the most technical area however the rest of the vehicle has been kept very basic and similar to previous 70 series.
79 Series Landcruiser Ride Comfort and cab space:
The 79 series Landcruiser is surprisingly comfy or so I thought up to about 2015. At this stage the seats began to feel ‘used’ after all the time in them. Long drives 1000+ kms took its toll on my lower back.I then put some Stratos seats in the 79 Series Landcruiser and it is honestly the best mod I’ve done to the interior of the vehicle to date! I’ve had those seats for 18 months as of AUG 2019 and they are still serving well although there is a bit of wear I’m starting to see. (Review to come)
Space on the rear seats is pretty much the same as any other dual cab on the market; however the windows are so big on the 70 series and combined with the rear seat height compared to the window kids absolutely love it as they have a huge window to look out of. BUT if the kids are teenagers they will not like the rear seat space if they are any taller the 5 foot 10. Leg room is limited.
Conclusion of the 79 Series LandCruiser:
The 79 series Landcruiser is produced mainly for mining, farming and towing purposes, however the V8 turbo diesel ute makes for the perfect base platform for the ultimate 4wd tourer, exploring vehicle or just a tough weekend warrior.As of 2019 its rumored that the end of the V8 is near, a possible V6 twin turbo is coming or so the rumors have it…
In my biased opinion this is the best current new 4WD as a base platform to modify. Like I said above “It was not a hard choice to make, given a V8 turbo diesel in a tray back Ute with solid axles, what more could you want?”
For Information About The Unichip Q4 In The 70 series LandCruiser See Here.
Specifications from stock:
Engine: 1VD-FTV, 4461cc, V8, 32 valve, Turbo Diesel
Power: 151kW @ 3400rpm(at flywheel) With Unichip: 129kW @ 3200rpm at rear wheels
Torque: 430Nm @ 1200rpm (at flywheel) With Unichip: 472Nm @ 1600rpm at rear wheels
Transmission:
5 Speed manual
GXL vs. Workmate
GXL Off-road Positives:
- VDJ70 GXL 2012 onwards roll out with front and rear lockers standard (a massive bonus)
- Factory flares
- Power windows
- Keyless entry
- Carpet flooring
Workmate Off-road Negatives:
- No flares
- No power windows
- No Keyless entry
- No factory lockers
- The GXL is well worth spending the extra coin on especially if it has factory lockers
PART 2: March 2019
The rear tray/canopy evolution:
The rear evolution is a long and big one! I’ll start from the beginning and work my way to Aug 2019:· Stage 1; The beginning of the long road, I had a solid plan well before picking up the Cruiser. The plan was to fit an alloy canopy on top of my heavy steel tray. A few lessons were learnt here. You pay for what you get! I got a good cheap price for a canopy from a local Perth business $4500. It wasn’t the best built canopy but it did the job, it was a heavy box and wasn’t really what I wanted. On top of that I put an Ostricwing awning at the time which was awesome but also very heavy. This I had for 2 and bit years before I sold the canopy because #1 it was far too heavy, #2 with all that space I seemed to bring way too much stuff with me & #3 it was a poor layout.
· Stage 2; After selling the canopy I was back to a flat tray with toolboxes and my fridge on the outside, this was nice and light plus very simple BUT not great for creating content. I didn’t have anywhere to charge things etc. so plans for a new half box started. Before that happened, I was rear ended and my tray got replaced via insurance.
· Stage 3; I went to On Track Fabrication and got them to build a new tray with my design and it looked mint and wasn’t too heavy but was heavier than my previous tray. This then later had a frame attached to it to enclose the tray and act as a roof rack plus solar panel mounting area.
· Stage 4; By this stage I got a custom half box made up by C&S canopies, this was a design to be a kitchen/charging station for camera gear and a drawer system on the opposite side. Guess what!? It ended up so heavy again and the cruiser was back to handling like a boat off-road. I sold the drawer system to reduce weight after one single trip to the Kimberly but was stuck with the heavy half box as I had no funds and time to change it.
· Stage 5; A bit later I had been chatting a lot with Jakkie from Quickpitch campers and together we designed Project Black, a new style of halfbox/drawer system that ticket all the boxes. The boxes ticket were the ones from learning from mistakes previously. Project black only weighs 50kg compared to 200kg from the previous half box. No welds! All rivets and glue, super light yet super strong. This was the biggest improvement and best thing I’ve done to date. Most of the design credit here needs to go to Jakkie as he transformed my needs into this clever light weight build. I’ve tested it for 18months with only one minor water leak that has been sorted. No cracks, warping or damage to report.
· Stage 6; a bit later I got the opportunity to test and fit a new light weight PCOR tray from Patriot Campers which is only 220kg far lighter than anything else I’ve ever had. All alloy, rivets & glue. This tray I had zero input into the design but I was sold on the weight and the unique steps & looks. I then added project black to the tray and it’s the best setup to date. I guess only time will tell but as of August 2019 this is the best and 100% lightest setup I’ve had to date.
Is the 79 Series Landcruiser completed?
If I told you it was completed, I would be Bullshitting you. There is always room for improvement but as for the rear I can say that unless something goes really wrong I won’t be changing the in any BIG way because its taken me 6 years to get the weight right. It handles so well now unlike ever before and that is a balance I don’t want to mess with.As for the rest of the 79 series Landcruiser. Well, I like to try new things and change things up when they don’t really work or wear out.
Evolution of the 79 series Landcruiser V8 Turbo Diesel VDJR79:
Stage 1: Stock.
Stage 2: Bar Work.
Stage 3: Lift & Tyres on the 79 Series Landcruiser.
Similar threads
