http://mil.news.sina.com.cn/jssd/2018-04-23/doc-ifznefki0655540.shtml
美军F35战机竟用中国3D打印机 就不怕中国制裁么
美军F35战机竟用中国3D打印机 就不怕中国制裁么
0
据美国国防部新闻网站消息，4月7日，在亚太搭载两栖攻击舰“黄蜂”号巡航的美国陆战队F-35B“闪电II”战机地勤人员，骄傲地展示了最新的3D打印飞机零件，殊不知这居然是一台中国制造3D打印机的结果。
美国海军的“黄蜂”号两栖攻击舰正搭载着陆战队VFMA-121中队的十余架F-35B“闪电”战机在亚太巡航。这是世界上第一种实际部署的五代隐身战机，还具备短距/垂直起降功能，而且第一次海外部署就选在了第七舰队辖区，显摆的意图非常明显啊。
然而4月7日，其中一架F-35B的一个舱门卡扣坏了。作为一种全新的战机，备品备件少的可怜，按惯例，必须跟美国本土联系，空运一个全新的舱门组建过来，最迟也要一个星期，而且非常昂贵。
舰上的地勤人员灵机一动，拿出了新配置的一台3D打印机，从网上下载了那个塑料卡扣的图纸，然后直接打印了一个出来，居然能用。不仅速度快，而且节约成本。以后再也不用为备品备件不足而担心了！这是首次在实际部署中，通过3D打印解决零部件问题。为此，美军新闻网站专门专稿来显摆此事，地勤人员拿着这个零件在F-35B前摆拍，得意洋洋！
等等！眼尖的中国网友突然发现，照片中展示的这台高大上的3D打印机有点眼熟！虽然自尊心极强的美军摄影干事做了虚化处理，但仔细对比一看，居然是中国浙江一家名为“闪铸科技”的企业出品的“梦想家”型高精度双喷头3D打印机！网购才6千人民币！支持16国语言操作，傻瓜化操作无学习门槛！
结合当下贸易大战，科技禁运之际，似乎特别有意义。
然而，美军采用中国制造的机电产品并非孤立，以前美军陆战队还测试过中国某著名型号的四旋翼无人机，美军急救包里不少敷料绷带啥的也是made in china。
难道美军不怕禁运么？
其实，美军采购这些中国机电产品、科技产品，并非因为自己搞不出来
比如3D打印机，世界前三名都是美国的。
第一名，美国3D systems，2013年营业收入5.13亿美元，SLA光固化技术行业领先，还有SLS选择性激光烧结技术，从航空航天，医疗，汽车到建筑、消费品都有。
第二名，美国Stratasys，是前者的竞争对手，2013年营业额4.84亿美元，主攻FDM熔融沉积技术，和Polyjet光敏树脂喷射技术。
第三名，美国Exone，2013年营业收入4000万美元，主营金属增材制造。全部都是工业级产品，在汽车、医疗、宇航领域。
第四名以后，才是德国Voxeljet公司，德国EOS公司，德国Comcept Laser公司，瑞士ARcamAB公司等。
美军采购中国公司产品的原因只有一个——便宜！一旦供货有问题，美军国内和欧美日韩大把供应商可选，无非贵一点。
所以，中国制造，任重道远！什么时候全世界人民都离不开了，才是真正厉害了！（作者署名：默虹美海军学习小站）
《出鞘》完整内容请关注新浪军事官方微信抢先查看（查看详情请搜索微信公众号：sinamilnews），《出鞘》每天在新浪军事官方微信完整首发。
U.S. F35 fighter jets use Chinese 3D printers and are not afraid of Chinese sanctions?
U.S. F35 fighter jets use Chinese 3D printers and are not afraid of Chinese sanctions?
0
According to the US Department of Defense News website, April 7, the ground crew of the US Marine F-35B Lightning II patrol carrying the amphibious assault ship The Hornets in the Asia-Pacific region proudly displayed the latest 3D printed aircraft parts. As everyone knows, this is actually the result of a Chinese-made 3D printer.
The US Navy's "Apis" amphibious assault ship is carrying more than a dozen F-35B "Lightning" fighter jets of the landing team VFMA-121 squadron in Asia-Pacific. This is the world's first five-generation stealth fighter that is actually deployed. It also has a short-range/vertical take-off and landing function, and the first overseas deployment was selected in the Seventh Fleet. The intention of the display is obvious.
However, on April 7, one of the F-35B's door cards was broken. As a brand-new fighter, poor spare parts, as a matter of course, must contact with the United States, air a new door to form over, at the latest a week, and very expensive.
The crew of the ship’s ground crew took the initiative and took out a new 3D printer. They downloaded the drawing of the plastic buckle from the Internet and printed one directly. They could actually use it. Not only speed but also cost savings. Never worry about spare parts shortage again! This is the first time in actual deployment that components have been solved through 3D printing. To this end, the U.S. military news website has specially issued special articles to show this, and the ground staff took this part to pose in front of the F-35B.
and many more! The sharp-eyed Chinese netizens suddenly discovered that the tall 3D printer displayed in the photo is a little familiar! Although the U.S. military photography officer with a strong self-esteem had done a virtual process, a close look at it was actually a “dreamer” type high-precision dual-nozzle 3D printer produced by a company in Zhejiang Province, China named “Flashlight Technology”! Online shopping is only 6,000 yuan! Support 16 language operations, stupid operation without learning threshold!
Combining the current trade wars and the embargo on science and technology, it seems particularly significant.
However, the use of Chinese-made mechanical and electrical products by the U.S. military is not isolated. In the past, the U.S. Marine Corps also tested a well-known four-rotor UAV in China. Many of the U.S. military first aid kits were also made in china.
Is the US military not afraid of the embargo?
In fact, the U.S. military purchases these Chinese mechanical and electrical products and technology products, not because they cannot make it out.
For example, 3D printers, the top three in the world are all in the United States.
In the first place, U.S. 3D systems, with an operating revenue of USD 513 million in 2013, led the industry in SLA photo-curing technology, and SLS selective laser sintering technology, ranging from aerospace, medical, automotive, to construction and consumer products.
In the second place, Stratasys of the United States is a competitor of the former, with a turnover of 484 million US dollars in 2013, focusing on FDM fused deposition technology, and Polyjet photosensitive resin injection technology.
Third, the United States Exone, with an operating income of US$40 million in 2013, is mainly engaged in metal additive manufacturing. All are industrial-grade products in the automotive, medical, and aerospace fields.
After the fourth, it was Germany Voxeljet, Germany EOS, Germany Comcept Laser, Switzerland ARcamAB and so on.
There is only one reason why the US military procures Chinese companies' products - cheap! Once there is a problem with supply, the U.S. military, as well as Japan, South Korea, Europe, and the United States, have a large number of suppliers that are optional.
Therefore, China has a long way to go! When the people of the world are inseparable, it is really powerful! (Author's signature: Mei Hongmei Naval Learning Station)
For the complete content of "Sheath", please pay attention to Sina Military official WeChat first check (see details, please search WeChat public number: sinamilnews), "Sheath" is the first full release of the Sina military official WeChat every day.
美军F35战机竟用中国3D打印机 就不怕中国制裁么
美军F35战机竟用中国3D打印机 就不怕中国制裁么
0
据美国国防部新闻网站消息，4月7日，在亚太搭载两栖攻击舰“黄蜂”号巡航的美国陆战队F-35B“闪电II”战机地勤人员，骄傲地展示了最新的3D打印飞机零件，殊不知这居然是一台中国制造3D打印机的结果。
美国海军的“黄蜂”号两栖攻击舰正搭载着陆战队VFMA-121中队的十余架F-35B“闪电”战机在亚太巡航。这是世界上第一种实际部署的五代隐身战机，还具备短距/垂直起降功能，而且第一次海外部署就选在了第七舰队辖区，显摆的意图非常明显啊。
然而4月7日，其中一架F-35B的一个舱门卡扣坏了。作为一种全新的战机，备品备件少的可怜，按惯例，必须跟美国本土联系，空运一个全新的舱门组建过来，最迟也要一个星期，而且非常昂贵。
舰上的地勤人员灵机一动，拿出了新配置的一台3D打印机，从网上下载了那个塑料卡扣的图纸，然后直接打印了一个出来，居然能用。不仅速度快，而且节约成本。以后再也不用为备品备件不足而担心了！这是首次在实际部署中，通过3D打印解决零部件问题。为此，美军新闻网站专门专稿来显摆此事，地勤人员拿着这个零件在F-35B前摆拍，得意洋洋！
等等！眼尖的中国网友突然发现，照片中展示的这台高大上的3D打印机有点眼熟！虽然自尊心极强的美军摄影干事做了虚化处理，但仔细对比一看，居然是中国浙江一家名为“闪铸科技”的企业出品的“梦想家”型高精度双喷头3D打印机！网购才6千人民币！支持16国语言操作，傻瓜化操作无学习门槛！
结合当下贸易大战，科技禁运之际，似乎特别有意义。
然而，美军采用中国制造的机电产品并非孤立，以前美军陆战队还测试过中国某著名型号的四旋翼无人机，美军急救包里不少敷料绷带啥的也是made in china。
难道美军不怕禁运么？
其实，美军采购这些中国机电产品、科技产品，并非因为自己搞不出来
比如3D打印机，世界前三名都是美国的。
第一名，美国3D systems，2013年营业收入5.13亿美元，SLA光固化技术行业领先，还有SLS选择性激光烧结技术，从航空航天，医疗，汽车到建筑、消费品都有。
第二名，美国Stratasys，是前者的竞争对手，2013年营业额4.84亿美元，主攻FDM熔融沉积技术，和Polyjet光敏树脂喷射技术。
第三名，美国Exone，2013年营业收入4000万美元，主营金属增材制造。全部都是工业级产品，在汽车、医疗、宇航领域。
第四名以后，才是德国Voxeljet公司，德国EOS公司，德国Comcept Laser公司，瑞士ARcamAB公司等。
美军采购中国公司产品的原因只有一个——便宜！一旦供货有问题，美军国内和欧美日韩大把供应商可选，无非贵一点。
所以，中国制造，任重道远！什么时候全世界人民都离不开了，才是真正厉害了！（作者署名：默虹美海军学习小站）
《出鞘》完整内容请关注新浪军事官方微信抢先查看（查看详情请搜索微信公众号：sinamilnews），《出鞘》每天在新浪军事官方微信完整首发。
U.S. F35 fighter jets use Chinese 3D printers and are not afraid of Chinese sanctions?
U.S. F35 fighter jets use Chinese 3D printers and are not afraid of Chinese sanctions?
0
According to the US Department of Defense News website, April 7, the ground crew of the US Marine F-35B Lightning II patrol carrying the amphibious assault ship The Hornets in the Asia-Pacific region proudly displayed the latest 3D printed aircraft parts. As everyone knows, this is actually the result of a Chinese-made 3D printer.
The US Navy's "Apis" amphibious assault ship is carrying more than a dozen F-35B "Lightning" fighter jets of the landing team VFMA-121 squadron in Asia-Pacific. This is the world's first five-generation stealth fighter that is actually deployed. It also has a short-range/vertical take-off and landing function, and the first overseas deployment was selected in the Seventh Fleet. The intention of the display is obvious.
However, on April 7, one of the F-35B's door cards was broken. As a brand-new fighter, poor spare parts, as a matter of course, must contact with the United States, air a new door to form over, at the latest a week, and very expensive.
The crew of the ship’s ground crew took the initiative and took out a new 3D printer. They downloaded the drawing of the plastic buckle from the Internet and printed one directly. They could actually use it. Not only speed but also cost savings. Never worry about spare parts shortage again! This is the first time in actual deployment that components have been solved through 3D printing. To this end, the U.S. military news website has specially issued special articles to show this, and the ground staff took this part to pose in front of the F-35B.
and many more! The sharp-eyed Chinese netizens suddenly discovered that the tall 3D printer displayed in the photo is a little familiar! Although the U.S. military photography officer with a strong self-esteem had done a virtual process, a close look at it was actually a “dreamer” type high-precision dual-nozzle 3D printer produced by a company in Zhejiang Province, China named “Flashlight Technology”! Online shopping is only 6,000 yuan! Support 16 language operations, stupid operation without learning threshold!
Combining the current trade wars and the embargo on science and technology, it seems particularly significant.
However, the use of Chinese-made mechanical and electrical products by the U.S. military is not isolated. In the past, the U.S. Marine Corps also tested a well-known four-rotor UAV in China. Many of the U.S. military first aid kits were also made in china.
Is the US military not afraid of the embargo?
In fact, the U.S. military purchases these Chinese mechanical and electrical products and technology products, not because they cannot make it out.
For example, 3D printers, the top three in the world are all in the United States.
In the first place, U.S. 3D systems, with an operating revenue of USD 513 million in 2013, led the industry in SLA photo-curing technology, and SLS selective laser sintering technology, ranging from aerospace, medical, automotive, to construction and consumer products.
In the second place, Stratasys of the United States is a competitor of the former, with a turnover of 484 million US dollars in 2013, focusing on FDM fused deposition technology, and Polyjet photosensitive resin injection technology.
Third, the United States Exone, with an operating income of US$40 million in 2013, is mainly engaged in metal additive manufacturing. All are industrial-grade products in the automotive, medical, and aerospace fields.
After the fourth, it was Germany Voxeljet, Germany EOS, Germany Comcept Laser, Switzerland ARcamAB and so on.
There is only one reason why the US military procures Chinese companies' products - cheap! Once there is a problem with supply, the U.S. military, as well as Japan, South Korea, Europe, and the United States, have a large number of suppliers that are optional.
Therefore, China has a long way to go! When the people of the world are inseparable, it is really powerful! (Author's signature: Mei Hongmei Naval Learning Station)
For the complete content of "Sheath", please pay attention to Sina Military official WeChat first check (see details, please search WeChat public number: sinamilnews), "Sheath" is the first full release of the Sina military official WeChat every day.
